Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Intake Manifold on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

This tutorial shows how to remove the intake manifold on a Toyota Yaris, a very simple and quick operation. Before proceeding, wait for the engine to cool completely for safety.

Start by opening the bonnet, then remove the upper engine cover and unscrew the two front supports. Next, disconnect both indicated pipes and, using a long 10mm spanner, unscrew the pairs of nuts and bolts securing the manifold.

At this point, you can separate the assembly from the engine head and proceed with fitting the replacement.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Remove the Carpet in a Toyota Yaris
How to Remove the Carpet in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This video illustrates the procedure for removing the carpet in a Toyota Vios Gen2, which can also be applied to a Toyota Yaris. After removing the m…
How to Remove the Rear Light Bulb on a Toyota Yaris
How to Remove the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the tailgate of your Toyota Yaris. Begin by unclipping the clips that secure the internal cover on the side of the boot. N…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos