Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carpet in a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011

See other generations:
Video tutorial

This video illustrates the procedure for removing the carpet in a Toyota Vios Gen2, which can also be applied to a Toyota Yaris. After removing the mats, dismantle the seats using the appropriate tool and remove them, disconnecting the connectors as well.

Next, remove and extract the central panel of your car and unclip the seatbelt attachments. At this point, you can remove the side plastic clips that secure the carpet and finally extract the carpet.

In just a few minutes and by following a few simple steps, you will have removed the carpet from your Toyota Yaris!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a first series 1.0 Petrol Toyota Yaris. First, recline the front seats and the rear seat…
How to replace the rear lights on the Toyota Yaris?
How to replace the rear lights on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial we can see how to replace the rear lights in the Toyota Yaris, an extremely simple and quick operation. First of all, make sure the …
How to remove the door panel of the Toyota Yaris?
How to remove the door panel of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To remove the door panel of the Toyota Yaris, detach the plastic cover from the top of the armrest and then the window switch panel by disconnecting …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos