Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on the 2005 Toyota Verso

Model: Toyota Verso MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

In this video, you will see how to reset the oil change light on the 2005 Toyota Verso. It is recommended, as shown in the video, to perform this procedure only after changing the oil and oil filter.

To carry out this procedure, press and hold the reset button located on the left side of the instrument cluster, and while holding it, turn on the instrument cluster. Once the instrument cluster is on, continue holding the button until the car's mileage appears on the display; at this point, you can release the button and restart the instrument cluster.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Verso?
How to Reset the Service Light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Regarding the routine maintenance of the Toyota Verso, it is similar to other cars; when the aforementioned light comes on, you need to change the en…
Resetting the Oil Change Light on a Toyota Corolla Verso
Resetting the Oil Change Light on a Toyota Corolla Verso
Toyota Verso (2004-2009 / MK 3) In this brief tutorial video, learn how to reset the oil change light on a Toyota Corolla Verso, produced from 2004 to 2009. First, turn on the vehic…
How to Reset the Service Light on the Toyota Verso
How to Reset the Service Light on the Toyota Verso
Toyota Verso (2009-2018 / MK 4) The following procedure will show you how to reset the service light for the routine maintenance oil change on the Toyota Verso. First, turn on the i…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos