Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : How to replace the oil filter in toyota Verso 2013?

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Oil filter
Operation: How to replace the oil filter in toyota Verso 2013?

Place the car on the deck and raise it to a comfortable height for working on it. Identify the position of the hole for the evacuation of the engine oil, put a pan underneath and unscrew the bolt to let all the oil out. Identify the position of the oil filter (in this case it is to the left of the engine block) and, using the appropriate wrench, unscrew it. Take the new oil filter and fit it in its housing. Replace the old gasket with a new one and proceed to assemble everything in its position. At this point, after having screwed in the bolt for oil evacuation, fill the specific tank with new engine oil, checking the level of the same using the usual dipstick. The maintenance operation that is performed in the images is carried out on a Toyota Verso.


Posted on 14 September 2023 by ScegliAuto



How to remove the air filter of a Toyota Yaris Verso
Toyota Verso (1995-2002 / MK 1) Before we can begin, we will necessarily have to open the front hood of our Toyota Yaris Verso. So let's start by unhooking the two side clips that s
How to replace the air filter on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) In order to replace the Toyota Verso air filter you have to go and open the hood so that you can access the engine compartment. Here, in the central
How to reset the oil change indicator light on the Toyota Verso.
Toyota Verso (2004-2009 / MK 3) In this video, we see how to reset the oil change indicator on a 2005 Toyota Verso. It is recommended, as shown in the video, to perform this procedu

Other guides that may interest you

    Frequently Asked Questions

    • Verso 2009-2018 - Where is the Toyota Verso oil filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos