Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tundra
    4. : To reset the maintenance light on a 2016 Toyota Tundra.

Toyota Tundra - Video tutorial

Model: Toyota Tundra Xk50 - Years 2007-2021
Part: Instrument cluster
Operation: To reset the maintenance light on a 2016 Toyota Tundra.

If the maintenance light on the instrument panel of your 2016 Toyota Tundra continues to stay on even after recently having a service, don't worry because you can easily reset it manually by following the following procedure. First, get into the driver's seat and turn on the ignition. Then, press the "Trip" button located below the speedometer multiple times until the display shows "Trip A". Next, keep holding down the same button and restart the ignition. Wait for the reset of the light to complete, and finally, release the "Trip" button.


Posted on 23 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Toyota Tundra 2007-2021 - What does the Toyota Tundra 2 serv light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos