Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Horn Relay in the Toyota Hilux Pickup?

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

If the horn in your Toyota Hilux pickup has suddenly stopped working, first check the status of the respective relay, whose location is indicated in this video. As shown, find the relay in the box located inside the cabin, protected by the black plastic cover on the driver's side.

It is labeled "Horn" and is the first relay in the last row on the right when looking at the box from the front. If it is faulty, make sure to use a replacement with equivalent specifications and work with the vehicle turned off to avoid any damage.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

What is the fuse diagram for the Toyota Hilux pickup?
Toyota HiLux (1988-1997 / N80, N110, N90, N100) If one or more devices in your Toyota Hilux pickup suddenly stop working, you can first check the status of the respective fuses, the diagrams of whi…
What is the Fuse Diagram for the Toyota Hilux Pickup?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this video, you can see where the fuse boxes are located in the Toyota Hilux pickup and what their diagrams are, useful in case you need to replac…
How to repair the fault in case of a non-functioning horn in a Toyota Hilux 2011
How to repair the fault in case of a non-functioning horn in a Toyota Hilux 2011
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) If the horn has stopped working, the first thing to check is the fuse box. Open it, usually located under the dashboard or in the engine compartment,…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos