Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the fault in case of a non-functioning horn in a Toyota Hilux 2011

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

See other generations:
Video tutorial

If the horn has stopped working, the first thing to check is the fuse box. Open it, usually located under the dashboard or in the engine compartment, and look for the horn fuse indicated on the cover. If it is blown, replace it with one of the same amperage.

If the fuse is fine, try to listen if the relay clicks when you press the horn; if it doesn't, it may be defective and needs to be replaced. Finally, as a last resort, check the cables and the button on the steering wheel, there may be a loose connection.

Otherwise, the horn itself may be faulty and needs to be replaced. In short, it takes a bit of patience and some testing.

If you don't feel comfortable doing it yourself, contact a trusted mechanic.


Posted on 29 March 2025 by ScegliAuto


Related tutorials

Toyota HiLux (2015-2024 / MK 8, An130, An120) If the horn in your Toyota Hilux pickup has suddenly stopped working, first check the status of the respective relay, whose location is indicated in …
Toyota HiLux (2015-2024 / MK 8, An130, An120) The fuses in the Toyota Hilux are divided among the designated fuse boxes installed within the vehicle: in this model, they are located inside the ca…
Toyota HiLux (1997-2005 / N160, N140, N150, N170) Each fuse in the Toyota Hilux is located inside designated fuse boxes installed in the vehicle. This type of vehicle has two fuse boxes. The first is…

Other guides you may be interested in

    Frequently Asked Questions

    • Hi Lux 2015-2024 - Where is the fuse for the Toyota Hilux cigarette lighter located? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos