Do it yourself
| ||||
|
Toyota HiLux - Video tutorial
Model: Toyota HiLux
An120, An130, MK 8
- Years 2015-2023 In this video we can see where the spare wheel is located in the Toyota Hilux pick-up and how to proceed to retrieve it, useful of course in case of a flat tire. As shown, the spare wheel is not located inside the cabin but underneath the rear bed. To release it from the support, we start by opening the right rear door, then lift the seat of the sofa and retrieve the tools provided. We then assemble the collapsible key using the three indicated pieces, insert it into the slot above the license plate and unscrew the bolt until the wheel is placed on the ground.
Posted on 4 April 2024 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |