Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recline the seats of the Toyota Hi Lux?

Model: Toyota HiLux An130, An120, MK 8 - Years 2015-2024
Part: Seat

The Toyota Hi Lux, like other Toyota models, places the battery inside the cabin under the rear seats of the vehicle. To access the battery or other electronic components located under the rear bench, we must first move the seats forward and then lift the seat itself. Once this is done, we can perform the desired maintenance. To position the seats as usual, we must lean them and push to lock them, then send the seats back. In the case of other Toyota models on the market, the steps to be taken may vary, also due to the size of the vehicle and the design layout of the cabin.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Recline the Rear Seats of a Toyota HiLux
How to Recline the Rear Seats of a Toyota HiLux
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) The rear seat of the Toyota HiLux cannot be reclined, but today you will learn how to do it with a simple 12 mm socket wrench. Open the rear doors an…
Where is the fuse box located in the 2012 Toyota Hi Lux?
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) If you own a 2012 Toyota Hi Lux and don't know where the fuse box is located, all you have to do is follow the steps described below to locate it wit…
Where is the OBD port located on the Toyota Hi Lux?
Where is the OBD port located on the Toyota Hi Lux?
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) If you are experiencing malfunctions in the control unit of your Toyota Hi Lux and want to identify the causes using a specific diagnostic tool, then…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos