Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Hi Lux

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

If the ignition battery in your vehicle is completely dead, you need to replace it. The text below contains all the useful and necessary information for a correct and safe replacement. Once you open the hood, locate the battery on the left side of the compartment.

First, disconnect the negative terminal, then the positive terminal. Remove the mounting bracket on top, then pull the battery out of its housing.

Take the new battery and insert it into the compartment, then reconnect the positive terminal first, followed by the negative terminal, and finally reattach the upper plate.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Toyota HiLux
How to Replace the Key Battery in a Toyota HiLux
Toyota HiLux (2015-2024 / MK 8, An130, An120) To safely and correctly replace the button battery inside your Toyota HiLux key (model year 2015-2022), you only need a few seconds. With the followi…
How to replace the battery of the Toyota Hi Lux key.
How to replace the battery of the Toyota Hi Lux key.
Toyota HiLux (2015-2024 / MK 8, An130, An120) In the following article, we will see how to replace the battery of the Toyota Hi Lux key. To replace the battery, first, you need to remove the emer…
How to replace the battery in the key of the Toyota Hi Lux
How to replace the battery in the key of the Toyota Hi Lux
Toyota HiLux (2015-2024 / MK 8, An130, An120) To complete the replacement of the battery located inside the key of your Toyota Hi Lux, all you need to do is follow the steps described in our new …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos