Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Toyota HiLux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

Are you planning to replace the battery on this vehicle model? It will be helpful to read the instructions below to correctly perform the replacement, and you can also check out the video. The battery is located on the left side of the engine compartment behind the headlight.

First, remove the screws securing the hold-down bracket. Next, disconnect the negative terminal first, then the positive terminal.

Remove the battery and replace it with the new one, reconnect the positive terminal first, then the negative terminal, and finally reinstall the hold-down bracket.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2000 Toyota HiLux
Where to Find the Fuse Box of the 2000 Toyota HiLux
Toyota HiLux (1997-2005 / N160, N140, N150, N170) In this mini guide for all of you with a 2000 Toyota HiLux, you will discover where the fuse box is located, allowing you to address electrical issue…
How to Replace the Battery in a Toyota Hi Lux
How to Replace the Battery in a Toyota Hi Lux
Toyota HiLux (2015-2024 / MK 8, An130, An120) If the ignition battery in your vehicle is completely dead, you need to replace it. The text below contains all the useful and necessary information …
Where to Find the Fuse Box on the Toyota Hi Lux
Where to Find the Fuse Box on the Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) To locate the fuses in your Toyota Hi Lux, follow these simple steps outlined in this guide. First, get into the driver's seat inside the cabin, ensu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos