Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. HiLux
    4. : Where are the headlight fuses located in the Toyota Hilux?

Toyota HiLux - Video tutorial

Model: Toyota HiLux MK 8, An120, An130 - Years 2015-2023
Part: Headlight
Operation: Where are the headlight fuses located in the Toyota Hilux?

In the event that the headlights of our Toyota Hilux suddenly stop working, and the respective bulbs are functional, we can check the state of the relevant fuses whose location is indicated in this video. As shown, the fuses in question are located in the box located inside the engine compartment, right next to the battery, and are labeled with the initials F13, F14, F15 and F16. If faulty, make sure you use spare parts with the same characteristics, 10A, and always operate with the vehicle off, otherwise we could cause damage to the various connected devices.


Posted on 11 April 2023 by ScegliAuto



Where are the fuses located in the Toyota Hilux?
Toyota HiLux (2005-2015 / MK 7, An10, An30, An20) On the Toyota Hilux, all fuses are divided into appropriate fuse boxes that are installed on the vehicle: there are three of them on this type of car
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (1997-2005 / N170, N160, N140, N150) Each fuse of the Toyota Hilux is located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (2005-2015 / MK 7, An10, An30, An20) On the Toyota Hilux, the fuses are contained within fuse boxes that are installed on the vehicle: in this car model, it is possible to identify three

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos