Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Toyota HiLux

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

If you plan to replace the battery on this model of vehicle, you will find the necessary information on how to proceed in this video and in the description below. After opening the hood, locate the battery on the left side of the compartment.

Proceed to disconnect the negative terminal first and then the positive terminal. Using a socket wrench, remove the support nut for the upper mounting bracket.

Next, remove the old battery and place the new one in position. Then, reconnect the positive terminal first and then the negative terminal, and finally reattach the upper support bracket, and the job is done.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2000 Toyota HiLux
Where to Find the Fuse Box of the 2000 Toyota HiLux
Toyota HiLux (1997-2005 / N160, N140, N150, N170) In this mini guide for all of you with a 2000 Toyota HiLux, you will discover where the fuse box is located, allowing you to address electrical issue…
How to Replace the Battery on a Toyota HiLux
How to Replace the Battery on a Toyota HiLux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) Are you planning to replace the battery on this vehicle model? It will be helpful to read the instructions below to correctly perform the replacement…
How to Replace the Battery in a Toyota Hi Lux
How to Replace the Battery in a Toyota Hi Lux
Toyota HiLux (2015-2024 / MK 8, An130, An120) If the ignition battery in your vehicle is completely dead, you need to replace it. The text below contains all the useful and necessary information …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos