Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on the Toyota Hi Lux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Dashboard

See other generations:
Video tutorial

If you are experiencing issues with the ECU of your Toyota Hi Lux and want to identify the causes using a diagnostic tool, read this guide carefully to locate the OBD port in just a few seconds. First, enter the vehicle and reach the driver's seat, then shift your attention to the lower part of the dashboard.

At this point, locate the OBD port you were looking for, and you are done. From now on, you will finally be able to connect a diagnostic tool to your Toyota Hi Lux.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Find the Fuse Box of the 2019 Toyota HiLux
How to Find the Fuse Box of the 2019 Toyota HiLux
Toyota HiLux (2015-2024 / MK 8, An130, An120) This brief video tutorial shows you where to find the fuse boxes of the 2019 Toyota HiLux and the OBD 2 diagnostic port. In this specific model, ther…
Where to Find the Fuse Box on the Toyota Hi Lux
Where to Find the Fuse Box on the Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) To locate the fuses in your Toyota Hi Lux, follow these simple steps outlined in this guide. First, get into the driver's seat inside the cabin, ensu…
How to reset the T-Belt light on the Toyota Hi Lux
How to reset the T-Belt light on the Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) The T-Belt indicator on the Toyota Hi Lux indicates that the timing belt needs to be replaced, this replacement should occur every 150,000 km. To res…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos