Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. HiLux
    4. : How to find the fuse box of the 2019 Toyota Hi Lux?

Toyota HiLux - Video tutorial

Model: Toyota HiLux MK 8, An130, An120 - Years 2015-2023
Operation: How to find the fuse box of the 2019 Toyota Hi Lux?

With this short video tutorial, we will show you where the fuse boxes of the 2019 Toyota Hi Lux are located, as well as the OBD 2 diagnostic port. In this specific model, there are three fuse boxes. The OBD 2 diagnostic port, as shown in the video, is located on the driver's side just below the dashboard, under the steering column. The main fuse box is located in the front hood near the car battery. All the instructions for each individual fuse can be found on the cover of the fuse box. The other two fuse boxes are located inside the vehicle. The first one is behind the storage compartment, and to view it, you just need to remove the compartment. The second fuse box is located under the storage compartment, and to view it, you just need to remove the plastic part.


Posted on 28 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Hi Lux 2005-2015 - Why is the radio not working in a Toyota Hilux? Read Answer
    • Hi Lux 2005-2015 - How to fix Toyota Hilux immobilizer problem? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos