Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
This video is currently unavailable

To replace the horn on a Toyota Yaris, open the bonnet to access the screws securing the front bumper to its housing. Once the screws at the top and bottom are loosened, detach the bumper to access the components underneath.

In the centre, locate the horn, which must be freed from its housing by unscrewing the screws and disconnecting the power cables. At this point, insert the new replacement part, securing and connecting it properly.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to replace the horn of the Toyota Yaris.
How to replace the horn of the Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) These short and simple steps will show us how to disassemble and replace the horn or audible warning of the Toyota Yaris. In order to access the horn…
Guide to Replacing the Horn on the Toyota Yaris
Guide to Replacing the Horn on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's guide will show you the procedure for removing and replacing the horn or sounder on the Toyota Yaris. First, open the vehicle's bonnet and be…
How to Replace the Horn on a Toyota Yaris
How to Replace the Horn on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you need to replace the horn on this model of car, the description below provides all the necessary information and steps for the replacement, and…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos