Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the horn of the Toyota Yaris.

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and replace the horn or audible warning of the Toyota Yaris. In order to access the horn, it will be necessary to remove the front bumper of the car; to do this, open the hood and unscrew all the fixing screws that we find on the top and on both sides of the front wheel arches.

At this point, unscrew the screw of the horn bracket and disconnect its electrical connector to remove it and replace it with the new original one; then check the operation of the horn, finally reassembling the bumper!


Posted on 3 March 2025 by ScegliAuto


Related tutorials

How to Replace the Horn on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the horn on a Toyota Yaris, open the bonnet to access the screws securing the front bumper to its housing. Once the screws at the top and …
Replacing the Horn on a Toyota Yaris
Replacing the Horn on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this short video tutorial, you will learn how to remove the horn from a first-generation Toyota Yaris in a few simple steps. First, open and lift …
How to Replace the Horn on a Toyota Yaris
How to Replace the Horn on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you need to replace the horn on this model of car, the description below provides all the necessary information and steps for the replacement, and…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos