Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Horn on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

See other generations:
Video tutorial

In this short video tutorial, you will learn how to remove the horn from a first-generation Toyota Yaris in a few simple steps. First, open and lift the bonnet; then locate the horn, which is situated just behind the bumper.

Next, unscrew its fixing screw with a 12 mm socket and remove it by disconnecting the electrical connector, pressing on the tab as shown in the video. Finally, replace it with the new one, reconnecting the connector and securing it with the bolt.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Horn on the Toyota Yaris
Guide to Replacing the Horn on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's guide will show you the procedure for removing and replacing the horn or sounder on the Toyota Yaris. First, open the vehicle's bonnet and be…
How to replace the horn of the Toyota Yaris.
How to replace the horn of the Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) These short and simple steps will show us how to disassemble and replace the horn or audible warning of the Toyota Yaris. In order to access the horn…
Where Are the Fuses on the Toyota Yaris?
Where Are the Fuses on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) All the fuses on the Toyota Yaris are divided within the designated fuse boxes installed in the vehicle: this model has two fuse boxes. The first is …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos