Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

If you need to replace the horn on this model of car, the description below provides all the necessary information and steps for the replacement, and you can also refer to the images in the video. Once you open the bonnet, locate the horn, which is situated just behind the cooling grille and in front of the radiator.

Proceed to remove the clips securing the plastic panel above the grille, then detach the grille. Next, unscrew the horn's mounting nut from the chassis to remove it and proceed with its replacement if necessary.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the horn on a Toyota Yaris, open the bonnet to access the screws securing the front bumper to its housing. Once the screws at the top and …
Replacing the Horn on a Toyota Yaris
Replacing the Horn on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this short video tutorial, you will learn how to remove the horn from a first-generation Toyota Yaris in a few simple steps. First, open and lift …
Guide to Replacing the Horn on the Toyota Yaris
Guide to Replacing the Horn on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's guide will show you the procedure for removing and replacing the horn or sounder on the Toyota Yaris. First, open the vehicle's bonnet and be…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos