Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator from the Toyota Yaris 1.8

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Radiator

This guide will illustrate the steps to remove and replace the cooling radiator of the Toyota Yaris 1.8. First, open the bonnet and begin to remove the front bumper by unscrewing all the fixing screws located at the top and on the wheel arches. Then disconnect the radiator hose, allowing the coolant to drain into a container for about ten minutes. Next, unscrew the radiator screws and disconnect the fan from it, so you can remove it and replace it with the new original one; finally, reassemble everything!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator of the Toyota Yaris?
How to Replace the Radiator of the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the radiator of the Toyota Yaris, open the bonnet to access the engine bay and remove the metal cover located directly above the number pl…
Removing the Cabin Heater Radiator on the Toyota Yaris 1
Removing the Cabin Heater Radiator on the Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this video tutorial, we will go through the main steps to remove the cabin heater radiator on the Toyota Yaris first series. First, get inside the…
How to Maintain the Water Reservoir of a Toyota Yaris
How to Maintain the Water Reservoir of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this guide, learn how to maintain a Toyota Yaris yourself to save on labour costs. To start: pull the plastic lever located at the bottom left of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos