Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Change the radiator fluid on Toyota Yaris Hybrid

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Antifreeze liquid
Operation: Change the radiator fluid on Toyota Yaris Hybrid

In this video we will see the steps to be able to replace the radiator fluid or antifreeze on a Toyota Yaris Hybrid, third series. First of all we lift the car on the front side and begin to remove the lower bulkhead of the engine, unscrewing the fixing screws, using a 10 mm socket wrench; then we go to open the throttle valve to drain the old radiator liquid from the circuit. Once finished, we can close the valve and refill the antifreeze liquid tank; fill up to the maximum level, topping up several times if necessary.


Posted on 2 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2020-2027 - Where to top up the coolant in the Toyota Yaris Hybrid? Read Answer
    • Yaris 2011-2019 - Where to top up the coolant of a Toyota Yaris? Read Answer
    • Yaris 1999-2005 - Where to put the antifreeze of the Toyota Yaris? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos