Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulbs on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: License plate light

See other generations:
Video tutorial

These brief steps will show you how to dismantle and replace the number plate bulbs on the Toyota Yaris, following the instructions below. First, move to the rear of the vehicle and start by detaching and removing the number plate light housing, prising it off the sides with something thin and sharp; then disconnect the bulb's electrical connector, as shown in the video.

At this point, remove and replace the small bulb in the light housing with the correct type and fitting; finally, refit the light housing!


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulbs on the Toyota Yaris
How to Replace the Number Plate Bulbs on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Follow this guide for instructions on how to remove and replace the number plate bulbs on the Toyota Yaris. First, open the boot lid and start prisin…
How to Replace the Number Plate Bulb on a Toyota Yaris
How to Replace the Number Plate Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to replace the damaged number plate bulb fitted on a Toyota Yaris. Use a screwdriver to remove the number plate light unit loc…
How to Replace the Number Plate Bulb on a Toyota Yaris?
How to Replace the Number Plate Bulb on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the number plate bulb on a Toyota Yaris, open the rear hatch to access the screws securing the interior trim panel. Once the panel is remo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos