Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tundra
    4. : How to reset the maintenance light on a 2010 Toyota Tundra

Toyota Tundra - Video tutorial

Model: Toyota Tundra Xk50 - Years 2007-2021
Part: Instrument cluster
Operation: How to reset the maintenance light on a 2010 Toyota Tundra

In order to successfully complete the manual reset of the maintenance light on your 2010 Toyota Tundra, you must follow all the various steps described in the following guide. First of all, you must reach the driver's seat and turn on the instrument panel. At this point, make sure that the "Trip A" option is displayed on the screen, and if not, press the "Trip" button multiple times until the desired screen appears. Next, turn off the panel and hold down the same button used previously, then turn the panel back on. Finally, wait for the maintenance light reset to be completed.


Posted on 25 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Toyota Tundra 2007-2021 - What does the Toyota Tundra 2 serv light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos