Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the cruise control device on the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Checks and maintenance

In order to install the cruise control device on the Toyota Yaris, you need to loosen the screws that fix the steering wheel to its housing: these screws are two and will be located in the two rear side parts of the steering wheel. Once these have been loosened, it will be possible to remove the steering wheel, also disconnecting all the underlying connectors. At this point, it will be possible to position the device in front of the turn signal lights, fixing and connecting it properly as shown in the tutorial. Finally, you can reposition the steering wheel to ensure that everything works correctly.

Posted on 31 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Select Cruise Control on a 2020 Toyota Yaris Hybrid
How to Select Cruise Control on a 2020 Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) This video shows you how to adjust the Cruise Control on a Toyota Yaris Hybrid. Look at the steering wheel controls and find the Cruise Control butto…
How to Activate the Cruise Control on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To activate the cruise control on the Toyota Yaris, you need to turn on the instrument panel by turning the ignition key in the ignition switch: once…
How do you activate the cruise control of the Toyota Yaris?
How do you activate the cruise control of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The cruise control activation on the Toyota Yaris can be done by turning on the engine, inserting the key into the ignition switch: once it has been …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos