Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Toyota RAV 4?

Model: Toyota Rav 4 MK 1, Xa10 - Years 1994-2000
Part: Timing belt

On the Toyota RAV 4, the timing belt can be replaced by opening the hood and accessing the components located on the left side of the engine block: here it will be possible to loosen the nut that secures the belt tensioner roller. By completely removing this roller, it will be possible to reduce the tension of the belt and remove it from its seat; at this point it will be possible to insert the new timing belt around the respective pulleys, reinstalling the belt tensioner roller. At the end of the installation, it will be necessary to verify that everything is functioning correctly.

Posted on 27 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Toyota RAV 4?
How do you replace the timing belt of the Toyota RAV 4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) The procedure for replacing the timing belt on the Toyota RAV 4 involves lifting the vehicle with a jack or a lift, so that the right front wheel and…
Guide to Replacing the Timing Belt on a Toyota RAV 4
Guide to Replacing the Timing Belt on a Toyota RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Let's look at the main steps and instructions on how to remove and replace the timing belt on a Toyota RAV 4. First, open the bonnet of the vehicle a…
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by remov…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos