|
Do it yourself
| |||
| ||||
Where to find and how to access the fuse box of a Toyota Yaris?
Model: Toyota Yaris
Xp10
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
The fuse box of a Toyota Yaris is located on the right side of the engine compartment. To access it, start by opening the bonnet of your Yaris. You will find the fuse box positioned near the battery, on the right side, when looking at the engine from the front of the vehicle. The box is covered by a black plastic cover. To access the fuses, you need to remove this cover: press the retaining clips or unscrew the screws, if present, and carefully lift the cover. Inside, you will find a diagram indicating the function of each fuse, helping you identify and replace the faulty one. Ensure the engine is off and disconnect the battery before handling the fuses to avoid short circuits or electric shocks. Once you have replaced the faulty fuse with a new one of the same amperage, refit the plastic cover and close the bonnet. This will ensure that the electrical system of your Toyota Yaris operates correctly.
Updated on 16 October 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(2005-2011 /
Xp90)
The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
Toyota Yaris
(2011-2019 /
Xp130)
The fuse box of your Toyota Yaris is located inside the dashboard, on the driver's side. To access it, start by opening the driver's door. Next, remo…
Toyota Yaris
(1999-2005 /
Xp10)
Are you wondering where the fuses are located on your Toyota Yaris? Let us tell you! The internal fuse box on the Toyota Yaris, model from 1999 to 20…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.166
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |