Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Triumph Speed 400?

Model: Triumph Speed 400
Part: Engine oil

Video tutorial

To change the motor oil of a Triumph Speed 400, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and place the motorcycle on a central stand to stabilize it. Locate the oil drain plug on the engine crankcase, usually located on the lower side.

Use an appropriate wrench to unscrew the plug and let the used oil drain completely into a collection pan. Once the draining is complete, securely screw back the drain plug.

Find the oil fill plug, often located on one side of the engine. Remove the plug and use a funnel to slowly pour the recommended amount of new motor oil as per the owner's manual.

Make sure not to exceed the maximum level. After completing the filling, securely screw back the fill plug.

Start the engine for a few minutes and check for any oil leaks.


Posted on 21 April 2025 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Triumph Speed 400?
How do you replace the engine oil of the Triumph Speed 400?
Speed 400 To replace the engine oil of the Triumph Speed 400, you need to loosen the drain plug of the oil pan, which is located in the central lower part of t…
How to change the engine oil of a Triumph Speed 400?
How to change the engine oil of a Triumph Speed 400?
Speed 400 To replace the motor oil of a Triumph Speed 400, start by placing the motorcycle on a flat surface and make sure the engine is warm but not too hot. …
How to Change the Engine Oil on the Triumph Speed 400?
How to Change the Engine Oil on the Triumph Speed 400?
Speed 400 You can change the engine oil on the Triumph Speed 400 by loosening the drain plug located at the bottom centre of the vehicle: once the plug is remo…

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos