Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the front brake pads of the Triumph Speed Twin by loosening the screws that secure the brake caliper to its housing: this can now be detached from its seat so that the pads inside can be released from the corresponding locking pin. At this point it will be possible to insert the new replacement pads so that they are locked by the pin: in this way it will be possible to attach the caliper to the disc to lock it with the screws and verify that everything is functioning correctly.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on the Triumph Speed Twin
How to Replace the Rear Brake Pads on the Triumph Speed Twin
Speed Twin This guide shows you the steps to remove and replace the rear brake pads on the Triumph Speed Twin. First, place the motorcycle on its centre stand a…
How to Replace the Battery in the Triumph Speed Twin?
How to Replace the Battery in the Triumph Speed Twin?
Speed Twin In this tutorial, you will see how to replace the battery in the Triumph Speed Twin, a very simple and quick operation. First, ensure that the key is…
How do you replace the levers of the Triumph Speed Twin?
How do you replace the levers of the Triumph Speed Twin?
Speed Twin The replacement of the brake and clutch levers on the Royal Enfield Speed Twin can be done by loosening the screws that fix them to their respective …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos