Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Triumph Scrambler 900, start by briefly warming up the engine to thin the oil, but be careful not to overheat it. Position the bike upright using a center stand or a stable support, and locate the drain plug situated under the engine. Place a container underneath the plug to collect the used oil and unscrew the plug with an appropriate wrench, allowing the fluid to drain completely. Once finished, screw the plug back on, ensuring it is tight. Next, remove the fill cap located at the top of the engine and pour in the new oil, following the quantity and type specified in the owner's manual. Start the engine briefly to distribute the oil, then turn it off and check the level, topping up if necessary.

Posted on 26 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Triumph Scrambler 900?
How to change the motor oil of a Triumph Scrambler 900?
Scrambler To change the engine oil of a Triumph Scrambler 900, start by positioning the motorcycle on a flat and solid surface, preferably using a central or s…
How to change the gearbox oil of a Triumph Scrambler 400?
How to change the gearbox oil of a Triumph Scrambler 400?
Scrambler To change the gearbox oil of a Triumph Scrambler 400, start by placing the motorcycle on a stable stand. First of all, make sure the engine is warm t…
How to Change the Engine Oil in a Triumph Scrambler?
How to Change the Engine Oil in a Triumph Scrambler?
Scrambler In this tutorial, you will see how to change the engine oil in a Triumph Scrambler, a very simple and quick operation. First, ensure that the engine …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos