Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Triumph Scrambler 900

Model: Triumph Scrambler
Part: Engine oil

Video tutorial

To change the engine oil on a Triumph Scrambler 900, start by positioning the bike on a flat, solid surface, preferably using a centre or side stand for stability. Remove the oil drain plug located at the bottom of the engine.

Place a collection container under the drain plug and allow the old oil to fully drain out. Once the oil has completely drained, reinstall and tighten the drain plug. Next, locate the oil filler cap, usually found at the top of the engine.

Use a funnel to pour new oil into the engine, ensuring you pour the correct amount as indicated in the owner's manual. After filling the engine with new oil, check for any leaks and ensure everything is sealed properly.

Start the engine and let it run for a few minutes, then turn it off and check the oil level to ensure it is correct. Complete the process by ensuring there are no leaks and that everything is functioning as expected.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Scrambler To change the engine oil of a Triumph Scrambler 900, start by briefly warming up the engine to thin the oil, but be careful not to overheat it. Posit…
Scrambler To change the engine oil on the Triumph Scrambler, loosen the oil drain plug located at the bottom centre of the vehicle. Once unscrewed, collect the…
Scrambler In this tutorial, you will see how to change the engine oil in a Triumph Scrambler, a very simple and quick operation. First, ensure that the engine …

How to Replace the Air Filter on the Royal Enfield Meteor 350

To replace the air filter on the Royal Enfield Meteor 350, loosen the bolts securing the side cover on the left side of the bike. Once these bolts are loosened, remove the cover to access the filter underneath. The filter can be removed from its housing by disconnecting its securing bolts and replacing it with a new spare part. After inserting the new filter, secure it in place with the bolts and reinstall the removed cover.

Watch the video!


by ScegliAuto

More videos