Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Tiger 1200 Xrx
In this tutorial, we will see how to replace the engine oil in the Triumph Tiger 1200 XRx, a very simple and quick operation. First, let's make sure that the engine is cold enough to work safely. Then, we position a container underneath the motorcycle, locate the drain hole bolt, and unscrew it using an 8mm hex key. Next, we let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, all that’s left to do is to pour in the necessary amount of oil through the designated upper hole.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Triumph Tiger 800 XRX?
How to replace the engine oil in the Triumph Tiger 800 XRX?
Tiger 800 Xrx In this tutorial we can see how to replace the engine oil in the Triumph Tiger 800 XRX, an extremely simple and fast operation. First of all, we wait…
How to Reset the Service Light on a Triumph Tiger 800 Xrx
How to Reset the Service Light on a Triumph Tiger 800 Xrx
Tiger 800 Xrx In a few simple steps, we will see the instructions for resetting the service light for the regular maintenance oil change on the Triumph Tiger 800 X…
How to Change the Engine Oil in the Triumph Tiger 1200?
How to Change the Engine Oil in the Triumph Tiger 1200?
Tiger 1200 Xc In this tutorial, you will learn how to change the engine oil in the Triumph Tiger 1200, a very simple and quick operation to perform every 12 months…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos