Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stator of the Triumph Daytona 675

Model: Triumph Daytona 675

Video tutorial

Below we will discover the instructions that will allow us to disassemble and replace the stator of the Triumph Daytona 675 motorcycle. First, we place the motorcycle on the stand and begin to remove the left side fairing of the bike; then we unscrew the side fixing screws of the stator cover, disconnecting the electrical connector to remove it, as shown in the video.

At this point, we separate the stator from the cover, replacing it if necessary with the new original one; we then replace the cover gasket, connecting the cable and checking its operation!


Posted on 24 January 2026 by ScegliAuto


Related tutorials

How to Replace the Stator on the Triumph Daytona 675?
How to Replace the Stator on the Triumph Daytona 675?
Daytona 675 To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws hav…
How to Replace the Thermostat on a Triumph Daytona 675
How to Replace the Thermostat on a Triumph Daytona 675
Daytona 675 This guide will illustrate the procedure for removing and replacing the thermostat on a Triumph Daytona 675 motorcycle. First, place the bike on a st…
How to Remove the Rear Wheel of the Triumph Daytona 675
How to Remove the Rear Wheel of the Triumph Daytona 675
Daytona 675 Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the grou…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos