Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Triumph Daytona 675

Model: Triumph Daytona 675
Part: Wheel

Video tutorial

Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the ground using the appropriate stand; then, unscrew the central axle of the rear wheel and disconnect the drive chain to remove it, as shown in the video.

At this point, replace the rear tyre or brake disc if necessary; then refit the rear wheel, adjusting the chain according to the instructions in the owner's manual!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to disassemble the rear wheel of the Triumph Daytona 675
How to disassemble the rear wheel of the Triumph Daytona 675
Daytona 675 The instructions provided in this guide will allow us to disassemble and replace the rear wheel and tire of the Triumph Daytona 675 motorcycle. First…
How to replace the stator of the Triumph Daytona 675
How to replace the stator of the Triumph Daytona 675
Daytona 675 Below we will discover the instructions that will allow us to disassemble and replace the stator of the Triumph Daytona 675 motorcycle. First, we pla…
How to Replace the Thermostat on a Triumph Daytona 675
How to Replace the Thermostat on a Triumph Daytona 675
Daytona 675 This guide will illustrate the procedure for removing and replacing the thermostat on a Triumph Daytona 675 motorcycle. First, place the bike on a st…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos