Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Triumph Speed Twin

Model: Triumph Speed Twin
Part: Battery

Video tutorial

Let's see how to change the battery on a Triumph Speed Twin: first, ensure the motorcycle is off, remove the seat - just pull it up - then remove the negative terminal - the black one - from the battery; be careful not to touch the motorcycle frame while unscrewing this terminal, as it could cause a short circuit; keep the terminal away from the frame, this is very important.

Next, remove the positive terminal, the red one. Take out the battery and replace it with a new one, proceeding in reverse order, connecting the positive terminal first and only then the negative black one. Secure all cables so they do not touch anything when you replace the seat.

Now you will need to reset the clock, which has disconnected when the battery was removed, and replace the seat.


Posted on 5 March 2026 by ScegliAuto


Related tutorials

Replacing Battery on Triumph Speed Twin
Replacing Battery on Triumph Speed Twin
Speed Twin In today's video tutorial, you will learn how to remove and replace the battery on a Triumph Speed Twin in simple steps. First, remove the rider's se…
How to Replace the Battery in the Triumph Speed Twin?
How to Replace the Battery in the Triumph Speed Twin?
Speed Twin In this tutorial, you will see how to replace the battery in the Triumph Speed Twin, a very simple and quick operation. First, ensure that the key is…
How to Install Heated Grips on a Triumph Speed Twin
How to Install Heated Grips on a Triumph Speed Twin
Speed Twin In this video tutorial, you will see the step-by-step process to install heated grips on a Triumph Speed Twin. First, remove the old original grips; …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos