Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To carry out the engine oil replacement on a Triumph Tiger 660, you will need to loosen the drain plug of the oil sump located at the central lower part of the vehicle: once the plug is removed, you can allow all the used oil to flow into a suitably positioned container and then remove the oil filter located in the same position. At this point, you can insert the new filter into its seat, in order to proceed with topping up: you will need to pour the necessary amount of fluid from the breather on the right side of the bike.

Posted on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Triumph Tiger 660?
Tiger 660 In this tutorial we can see how to adjust the time on the Triumph Tiger 660, an extremely simple and quick operation, to be carried out for example a…
How to change the engine oil of a Triumph Tiger 660?
Tiger 660 To change the motor oil of a Triumph Tiger 660, you need to follow some steps. First of all, make sure the engine is cold to avoid burns. Lift the mo…
How do you replace the air filter of the Triumph Tiger 660?
Tiger 660 In order to replace the air filter of the Triumph Tiger 660, you need to unscrew the screws that secure the motorcycle seat to its housing, so that i…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos