Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Tiger 1200 Explorer

How to Change the Engine Oil in the Triumph Tiger 1200 Explorer?

Model: Triumph Tiger 1200 Explorer
Part: Engine oil

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Explorer, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container beneath the bike, locate the drain bolt, and unscrew it using an 8mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the bolt. Finally, pour the required amount of oil through the designated upper hole.

Posted on 5 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the engine oil in the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick operation. First of…
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…
How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer, a very simple and fast operation. First of …

How to Replace the Battery on a Royal Enfield Meteor 350

Today's instructions will show you how to remove and replace the battery on a Royal Enfield Meteor 350 motorcycle in simple steps. First, place the motorcycle on the centre stand and begin by removing the side cover of the battery; then unscrew the bracket screws and disconnect both battery terminals (positive and negative), as illustrated in the video. At this point, remove and replace the battery with a new one of the correct type and the same amperage; refit it in the correct orientation to enable the electrical connection.

Watch the video!


by ScegliAuto

More videos