Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on a Triumph Trident 660?

Model: Triumph Trident 660
Part: Brake pads

Video tutorial

You can replace the brake pads on a Triumph Trident 660 by performing the same operation for both the front and rear wheels: you will need to loosen the screws that secure the caliper to the disc, allowing it to be detached. Then, remove the pin that holds the pads inside the caliper so that they can be extracted: now, position the new pads in their place, securing them with the pin. The caliper can then be reattached to the disc, securing it with the screws and checking that everything is functioning properly.


Posted on 9 October 2026 by ScegliAuto


Related tutorials

Trident 660 This guide provides the main instructions on how to remove and replace the front brake pads on a Triumph Trident 660. First, place the motorcycle on …
Trident 660 Today we will see, in this brief guide, the instructions that will allow us to disassemble and replace the rear brake pads of the Triumph Trident 660…
Trident 660 To replace the brake and clutch levers of the Triumph Trident 660, insert a flat screwdriver into the head of the screw that secures the lever to pre…

How to Remove the Rear Wheel of the Triumph Daytona 675

Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the ground using the appropriate stand; then, unscrew the central axle of the rear wheel and disconnect the drive chain to remove it, as shown in the video. At this point, replace the rear tyre or brake disc if necessary; then refit the rear wheel, adjusting the chain according to the instructions in the owner's manual!

Watch the video!


by ScegliAuto

More videos