Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant in a Piaggio Vespa GT 200

Model: Piaggio Vespa Gt 200
Part: Antifreeze coolant

Video tutorial

Here is a guide on how to replace the coolant in the engine of a Piaggio Vespa GT 200 scooter. First, put the central stand down and start by removing the plastic cover above the glove compartment on the right; then unscrew the cap of the coolant reservoir, as shown in the video.

Now, remove the three screws securing the water pump cover, allowing the fluid to drain into a container for about ten minutes; finally, pour in the new antifreeze, filling to the correct level!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
Vespa Gt 200 In this tutorial, you will see how to replace the air filter on the Piaggio Vespa GT 200 scooter, a very simple and quick operation to perform every …
How to replace the engine oil in the Piaggio Vespa GT 200 L scooter?
How to replace the engine oil in the Piaggio Vespa GT 200 L scooter?
Vespa Gt 200 In this tutorial we can see how to replace the engine oil in the Piaggio Vespa GT 200 L scooter, an extremely simple and quick operation. First of al…
How to change the motor oil of a Vespa?
How to change the motor oil of a Vespa?
Vespa Gt 200 Changing the motor oil of a Vespa requires some simple operations performed carefully. Start by positioning the vehicle on a stable surface and using…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos