Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Vespa?

Model: Piaggio Vespa Gt 200
Part: Engine oil

Video tutorial

Changing the motor oil of a Vespa requires some simple operations performed carefully. Start by positioning the vehicle on a stable surface and using the center stand to ensure it remains steady.

Make sure the engine is slightly warm, as the fluid oil will flow more easily. Under the engine, locate the oil drain plug, remove it with a suitable wrench, and place a container underneath to collect the used liquid.

Let it drain completely for a few minutes, making sure no residue remains. Once finished, securely screw the plug back in, being careful not to tighten it too much to avoid damage.

Finally, add the correct amount of new oil, checking the level using the dipstick or the appropriate indicator.


Posted on 10 November 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Piaggio Vespa GT 200 L scooter?
How to replace the engine oil in the Piaggio Vespa GT 200 L scooter?
Vespa Gt 200 In this tutorial we can see how to replace the engine oil in the Piaggio Vespa GT 200 L scooter, an extremely simple and quick operation. First of al…
How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
Vespa Gt 200 In this tutorial, you will see how to replace the air filter on the Piaggio Vespa GT 200 scooter, a very simple and quick operation to perform every …
Replacing the Coolant in a Piaggio Vespa GT 200
Replacing the Coolant in a Piaggio Vespa GT 200
Vespa Gt 200 Here is a guide on how to replace the coolant in the engine of a Piaggio Vespa GT 200 scooter. First, put the central stand down and start by removin…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos