Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Piaggio Vespa GT 200 L scooter?

Model: Piaggio Vespa Gt 200
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Piaggio Vespa GT 200 L scooter, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the scooter, locate the drain hole bolt and unscrew it using a 24mm socket wrench.

Next, remove the secondary filter, clean it from any dirt residue and proceed by unscrewing the main filter. Once all the oil has drained from the system, tighten the replacement filter, reassemble everything and add the necessary amount of oil through the appropriate upper hole.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
How to Replace the Air Filter on the Piaggio Vespa GT 200 Scooter
Vespa Gt 200 In this tutorial, you will see how to replace the air filter on the Piaggio Vespa GT 200 scooter, a very simple and quick operation to perform every …
Replacing the Coolant in a Piaggio Vespa GT 200
Replacing the Coolant in a Piaggio Vespa GT 200
Vespa Gt 200 Here is a guide on how to replace the coolant in the engine of a Piaggio Vespa GT 200 scooter. First, put the central stand down and start by removin…
How to change the motor oil of a Vespa?
How to change the motor oil of a Vespa?
Vespa Gt 200 Changing the motor oil of a Vespa requires some simple operations performed carefully. Start by positioning the vehicle on a stable surface and using…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos