Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides the main instructions on how to remove and replace the front brake pads on a Triumph Trident 660. First, place the motorcycle on its stand and start unscrewing the fixing screws of the front brake caliper to remove it from the disc (applying pressure to the caliper piston); then remove the old brake pads, cleaning the caliper of any residual dirt, as shown in the video. At this point, install the new brake pads, refitting the caliper onto the disc and similarly replacing the other brake pads.

Posted on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear brake pads on the Triumph Trident 660.
How to replace the rear brake pads on the Triumph Trident 660.
Trident 660 Today we will see, in this brief guide, the instructions that will allow us to disassemble and replace the rear brake pads of the Triumph Trident 660…
How to Change the Engine Oil on a Triumph Trident 660?
How to Change the Engine Oil on a Triumph Trident 660?
Trident 660 To change the engine oil on the Triumph Trident 660, you need to unscrew the oil drain plug located at the bottom of the bike, at the front. Once the…
How to replace the exhaust on the Triumph Trident 660?
How to replace the exhaust on the Triumph Trident 660?
Trident 660 You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos