|
Do it yourself
| |||
| ||||
|
Model: Triumph Trident 660
To replace the brake and clutch levers of the Triumph Trident 660, insert a flat screwdriver into the head of the screw that secures the lever to prevent it from rotating. Then, use a spanner to loosen the nut at the base of the screw, sliding it out and removing the lever. The new lever must be installed by reversing the procedure. The same operation will be performed to replace the clutch lever, but before proceeding, loosen the washer located at the base of its actuator cable.
Updated on 13 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Trident 660
To replace the brake and clutch levers on the Triumph Trident, insert a flathead screwdriver into the head of the screw that secures the lever to pre…
Trident 660
To replace the brake and clutch levers on the Triumph Trident, insert a flat screwdriver into the head of the screw that secures the lever to prevent…
Trident 660
In this tutorial we can see how to replace the engine oil in the Triumph Trident 660, an extremely simple and quick operation. First of all, make sur…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.190
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |