Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Trident 660
Part:

To replace the brake and clutch levers on the Triumph Trident, insert a flathead screwdriver into the head of the screw that secures the lever to prevent it from rotating. Then, using the appropriate spanner, loosen the nut located at the base of the screw. This will allow you to remove the pin and consequently the lever. Install the new lever by reversing the procedure. The same operations can be performed to replace the clutch lever, but before proceeding, it is necessary to loosen the washer located at the base of both cables.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Levers of the Triumph Trident 660?
How to Replace the Levers of the Triumph Trident 660?
Trident 660 To replace the brake and clutch levers of the Triumph Trident 660, insert a flat screwdriver into the head of the screw that secures the lever to pre…
How to replace the exhaust on the Triumph Trident 660?
How to replace the exhaust on the Triumph Trident 660?
Trident 660 You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …
How to Replace the Levers on the Triumph Trident 660?
How to Replace the Levers on the Triumph Trident 660?
Trident 660 To replace the brake and clutch levers on the Triumph Trident, insert a flat screwdriver into the head of the screw that secures the lever to prevent…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos