Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on the Triumph Trident 660?

Model: Triumph Trident 660
Part:

Video tutorial

To replace the brake and clutch levers on the Triumph Trident, insert a flat screwdriver into the head of the screw that secures the lever to prevent it from rotating. At the same time, use a spanner to loosen the nut located at the base of the screw.

This will allow you to remove the screw and consequently the lever. The new lever should be installed by reversing the procedure.

These operations can also be performed to replace the clutch lever, but before proceeding, it will be necessary to loosen the washer located at the base of the clutch cable.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to replace the brake and clutch levers on the Triumph Trident 660
How to replace the brake and clutch levers on the Triumph Trident 660
Trident 660 The main instructions in this guide will show you how to remove and replace the brake and clutch levers on the Triumph Trident 660 motorcycle. First,…
How to replace the air filter of the Triumph Trident 660
How to replace the air filter of the Triumph Trident 660
Trident 660 Below we will discover the steps that will allow us to disassemble and replace the air filter of the Triumph Trident 660 engine. First, we put the mo…
How to replace the exhaust on the Triumph Trident 660?
How to replace the exhaust on the Triumph Trident 660?
Trident 660 You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos