Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Sym VTS 200?

Model: Sym Vts 200
Part:

Video tutorial

To replace the belt on a Sym VTS 200, you need to loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the securing screws of the cover are loosened, you can completely detach it and access the components underneath: you will need to loosen the central bolts of the variator and the clutch, which can be removed along with the corresponding belt around them.

At this point, you can insert the new belt, repositioning the clutch and variator, and cover everything with the cover.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Vts 200 Follow the steps necessary to remove and replace the drive belt on the Sym VTS 200 scooter. First, place your scooter on the centre stand and start u…
Vts 200 This guide outlines the main steps to dismantle and replace the instrument cluster of the Sym VTS 200 scooter. First, remove the front part of the sc…
Vts 200 In this tutorial, we will see how to replace the engine oil in the SYM VTS 200 scooter, a very simple and quick operation. First, let's make sure tha…

How to Remove the Rear Wheel of the Triumph Daytona 675

Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the ground using the appropriate stand; then, unscrew the central axle of the rear wheel and disconnect the drive chain to remove it, as shown in the video. At this point, replace the rear tyre or brake disc if necessary; then refit the rear wheel, adjusting the chain according to the instructions in the owner's manual!

Watch the video!


by ScegliAuto

More videos