Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Triumph Bonneville

Model: Triumph Bonneville
Part: Headlight

Video tutorial

Remove all the screws around the round headlamp that hold the centre together, acting as a joint between the front and rear of the unit. Now, with a bit of force, the front part should detach: disconnect the central connector by pressing the two clips, then remove the dust cover as shown in the video.

Finally, disconnect the small lower connector. Lift the metal clip that secures the connector to the headlamp, remove it, and you can finally extract the bulb connector duo. Now disconnect the bulb and insert the new one, then reassemble everything.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads and Brake Fluid on the Triumph Bonneville
How to Replace the Front Brake Pads and Brake Fluid on the Triumph Bonneville
Bonneville Today, we will see in this short and simple guide how to remove and replace the front brake pads and brake fluid on the Triumph Bonneville motorcycle…
How to Replace the Brake Pads on a Triumph Bonneville
How to Replace the Brake Pads on a Triumph Bonneville
Bonneville Below is the procedure necessary to remove and replace the brake pads, both front and rear, of the Triumph Bonneville in simple steps. First, place y…
How to replace the front headlamp on a Triumph Bonneville?
How to replace the front headlamp on a Triumph Bonneville?
Bonneville As shown in this tutorial, replacing the front headlamp on a Triumph Bonneville is a straightforward and quick task. First, ensure the key is not ins…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos