Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Brake and Clutch Levers on the Triumph Street Triple S 660

Model: Triumph Street Triple S 660
Part:

Video tutorial

In today's tutorial, you will learn how to remove and replace the brake and clutch levers on the 2019 Triumph Street Triple S 660. First, remove the clutch lever by unscrewing the central fixing screw; then disconnect the clutch cable to remove the lever, as shown in the video.

Now, fit the new lever by inserting the cable and adjusting the clutch disengagement.

To remove the front brake lever, simply unscrew the central screw; then fit the new one in the same way, adjusting the lever travel!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
Street Triple S 660 To remove the fuel tank from the Triumph Speed Triple S 660, loosen the two screws securing it at the front of the tank, just behind the handlebars. …
How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
Street Triple S 660 Today, we will discover how to carry out the routine maintenance service by changing the engine oil and oil filter on a Triumph Street Triple RS. Fir…
How to set the clock on the Triumph Street Triple S?
How to set the clock on the Triumph Street Triple S?
Street Triple S 660 To set the clock on the Triumph Street Triple S, turn on the instrument cluster, then repeatedly press the button at the top left of the cluster unti…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos