Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the Triumph Street Triple S?

Model: Triumph Street Triple S 660
Part: Clock

Video tutorial

To set the clock on the Triumph Street Triple S, turn on the instrument cluster, then repeatedly press the button at the top left of the cluster until you find the "Setup" option: this should be selected with the button at the bottom left of the display.

Then, when you find the "t-Set" option, select it and adjust the hours first and then the minutes with repeated presses of the button at the top left of the cluster: once the time adjustment is complete, confirm the entry by returning to the initial screen and turning off the cluster.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
Street Triple S 660 Today, we will discover how to carry out the routine maintenance service by changing the engine oil and oil filter on a Triumph Street Triple RS. Fir…
Replace the Brake and Clutch Levers on the Triumph Street Triple S 660
Replace the Brake and Clutch Levers on the Triumph Street Triple S 660
Street Triple S 660 In today's tutorial, you will learn how to remove and replace the brake and clutch levers on the 2019 Triumph Street Triple S 660. First, remove the …
How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
Street Triple S 660 To remove the fuel tank from the Triumph Speed Triple S 660, loosen the two screws securing it at the front of the tank, just behind the handlebars. …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos