Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil and Oil Filter on the Triumph Thruxton 1200

Model: Triumph Thruxton 1200 R
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to perform routine maintenance by replacing the engine oil and oil filter on the Triumph Thruxton 1200. First, position the stand on your bike and start by removing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; next, use a ratchet spanner to unscrew and remove the oil filter, replacing it with a new one. Finally, refill the crankcase with new oil of the correct grade (as indicated in the user and maintenance manual)!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Triumph Thruxton 1200 R?
How do you replace the air filter of the Triumph Thruxton 1200 R?
Thruxton 1200 R In order to replace the air filter of the Triumph Thruxton 1200 R, you need to remove the two side panels located under the seat of the motorcycle. O…
How do you reset the Service light on the Triumph Thruxton 1200 R?
How do you reset the Service light on the Triumph Thruxton 1200 R?
Thruxton 1200 R To reset the Service light of the Triumph Thruxton 1200 R, you will need to turn on the instrument panel by inserting the ignition key into the corre…
How to Replace the Air Filter on a Triumph Thruxton 1200 R?
How to Replace the Air Filter on a Triumph Thruxton 1200 R?
Thruxton 1200 R To replace the air filter on the Triumph Thruxton 1200 R, you need to loosen the bolts that secure the old filter in its housing, which is located ju…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos