Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Scrambler
Part:

For painting the tank and the related fairing elements on the Triumph Scrambler, first, position your bike in a stable and safe location to ensure the operator's full safety while performing the work. Then, after placing the Scrambler on the stand, remove the tank and other fairing elements that need to be painted. Place them on a suitable surface that you should cover with paper and plastic to protect the parts not involved in the painting. At this point, you can proceed to paint the relevant elements using spray paint or a compressor, being careful to apply the masking tape in a way that achieves the desired design. Finally, clean the elements and reassemble them on the bike. And that's it!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Tank on a Triumph Scrambler
Scrambler Today, you will learn how to remove the tank from a Triumph Scrambler. First, remove the seat and begin by unscrewing the long tank screw located at …
How to Replace the Fuel Filter on a Triumph Scrambler?
How to Replace the Fuel Filter on a Triumph Scrambler?
Scrambler In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately…
How to Replace the Fuel Filter on the Triumph Scrambler
How to Replace the Fuel Filter on the Triumph Scrambler
Scrambler To replace the fuel filter on the Triumph Scrambler, you need to completely remove the fuel tank located at the front of the bike. This tank can be r…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos